Call 1-800-583-5500 Mon - Fri, 9:00 am - 5:00 pm EST



Product image

Plantronics SAVI HL10 Straight Plug Handset Lifter

$84.70 USD
Our Price: $46.97 USD
  • 45 % off
SKU: PLTSAVIHL10
Part Number: 60961-35

Quick overview

  • The Savi HL10 Lifter with straight plug for Plantronics Savi Wireless Headset Series.? The Savi HL10 handset lifter fits on your telephone, letting you answer calls with the touch of a button, conveniently and automatically takes your handset off hook.

    Compatible with Plantronics Savi Wireless Headset Series and the new CS500 and W700 series CS510, CS520, CS530 and CS540.
    Not compatible with older models: CS50, CS55, CS70, CS70N, CS351, CS351N, CS361, CS361N.

Qty:

Not Sure Which Headset to Buy? Start Here: Have Questions ? 1-800-583-5500



The Savi HL10 Lifter with straight plug for Plantronics Savi Wireless Headset Series.? The Savi HL10 handset lifter fits on your telephone, letting you answer calls with the touch of a button, conveniently and automatically takes your handset off hook.

Compatible with Plantronics Savi Wireless Headset Series and the new CS500 and W700 series CS510, CS520, CS530 and CS540.
Not compatible with older models: CS50, CS55, CS70, CS70N, CS351, CS351N, CS361, CS361N.


Basic Setup:
You will need:

hl10_setup_1.jpg

(Your HL10 Lifter) (Interface Cable Included with Headset)
Connect your headset system and lifter to your telephone as pictured below:

hl10_setup_2.jpg


Or, follow these step-by-step instructions:
1) Unplug your phone's handset.
2) Plug one end of the telephone interface cable into the phone's handset port and the other end into the back of the CS500 series base.
3) Plug your phone's handset cable into the box in the middle of the interface cable.
4) Firmly press the handset lifter power cord into the handset lifter jack.
5) With the phone's handset on the hook, slide the handset lifter arm under the handset until the lifter base touches the side of the phone and the handset earpiece.
6) While wearing your headset, press the call control button on your headset to activate the lifter.
7) If you do hear a dial tone, the lifter is set correctly and needs no adjustment.
8) Set the lifter by removing the protective strips from the mounting tape on the underside of the lifter, then gently place the lifter on the desk phone in the pre-determined position. Press firmly to adhere.

Setup Video:

Data Sheet :hl10 eng
User Guide : hl10 ug en

Customer Reviews


There have no reviews in this product.



Add Your Own Review


*
*
*
*

Maximum length is 5000 characters
Captcha :