Compatible with Cisco Unified IP Phones: Cisco Unified IP Phone 7975G, Cisco Unified IP Phone 7945G, Cisco Unified IP Phone 7965G, Cisco Unified IP Phone 7942G, Cisco Unified IP Phone 7962G
The Armor Liberté Wireless EHS106 Adapter enables remote Electronic Hook Switch Control (EHS) with wireless headsets and selected Cisco IP phones.
This means that users can hear ring tones, answer and end calls, adjust the volume or even mute the call while away from their desks. The integration of handset and headset allows users to benefit from enhanced mobility and the ability to multitask while on a call. The wireless freedom improves work efficiency and ergonomics throughout the day.
HOW IT WORKS
The EHS Adapter is a plug-and-play solution that converts from the DHSG standard used in Cisco phones to the DHSG standard used in wireless headsets and vice versa.
Important Note:
Your Cisco telephone system administrator must have "Wireless Headset Hookswitch Control" enabled for your telephone.
Below are the instructions to enable Hookswitch Control feature:
- Make sure the CUCM version is 4.1(3)SR5x or higher
- Make sure the phone F/W is 8.3(3)x or higher
- Access the server administrator with a browser
- Select Device > Phone through the drop down menus
- Click "Find" with no selection criteria to obtain a list of all phones
- Open the desired phone. Scroll down to "Wireless Headset Hookswitch Control", set to "Enabled", Click "Apply"
- Reboot the phone
